accQcomm Interface Module

Appendix A Commands, Constants, and Registers

A-5

Initialize modem

Param 1 (String): A command string used to initialize the modem. All

parameters must be entered on one line with no spaces. The command

string is sent to the modem at startup.

Example — Sets the modem to auto-answer after two rings and disables

DTR line checking:

ATS0=2;&D0&K0

Coordinate Flash/BBRAM totalizers

Param 1 (0 or1): Direction of coordination:

If 0, then the Flash totalizers are set to the current value of the BBRAM

totalizers. If 1, the BBRAM totalizers are set to the current value of the Flash

totalizer.

Set all settings to system defaults

NOTE: Reset the unit to factory defaults by entering an SD command fol-

lowed by an SS command.

Control/Programming port flow control

toggle

Param 1 (1 or 0): Toggles flow control on the unit’s programming port. Flow

control (CTS/RTS) can be used if the unit is connected to a modem or other

telephony device. 1 enabled flow control, 0 disabled flow control.

Reinitialize hardware to current settings

This command configures all hardware for the current settings without a

restart.

Instrument type

Param 1 (Range 1 to 3): The instrument connection that is being set. This

corresponds to the connections labeled 1 to 3 on the front panel.

Param 2: The instrument type. The valid entries are “ADFM,” “AccQmin,”

“HADFM,” and “NONE.” If the instrument type is “None” then the given port

is disabled.

Example —

Sets instrument 1 as an ADFM.

?>SI 1 ADFM

Modem Connected

Param 1 (Range 1 or 0): 1 if a modem is connected, 0 if it is not. If 1, the

modem initialization string will be sent at startup (see SB command); this

does not turn flow control on or off (see SF command).

Site Name/Instrument Name

Param 1 (Range 0 to 3): The device for which the name is being set. 0 is the

site device name, 1 – 3 are the instrument names.

Param 2: The site name length. Must be less than 12 characters, alphanu-

meric only.

Instrument time-out

Param 1 (Range 60 to 3600+): The time-out for instrument 1 in seconds. If

the specified time elapses without a valid reading from the instrument, then

the bad data counter is incremented. If this counter reaches the value spec-

ified by the AB command, the analog output returns to 4.0 mA. The mini-

mum value is 60 seconds; if the value is greater than 3600, the time-out

counter is not used.

Param 2 (Range 60 to 3600+): The time-out for instrument 2 in seconds

(see parameter 1).

Param 3 (Range 60 to 3600+): The time-out for instrument 2 in seconds

(see parameter 1).

NOTE: To disable time-outs, enter a value greater than 3600.

Table A-1 accQcomm Program Commands (Continued)

Commands and Definitions Functions

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 63 64

Komentáře k této Příručce

Žádné komentáře

ARTHUR MARTIN ELECTROLUX ASI64030X manuales

Manuales del propietario y guías del usuario para Lavadoras ARTHUR MARTIN ELECTROLUX ASI64030X.
Ofrecemos 1 manuales en pdf ARTHUR MARTIN ELECTROLUX ASI64030X para descargar gratis por tipos de documentos: Manual de usuario

Arthur martin electrolux ASI64030X Manual de usuario (24 paginas)

Marca: Arthur-martin-electrolux | Categoria: Washing machines | Tamaño: 2.15 MB |

Tabla de contenidos

Lave-vaisselle

Sommaire

Electrolux. Thinking of you

Consignes de sécurité

4 electrolux

Bandeau de commande

Avant la première utilisation

Utilisation du sel régénérant

10 electrolux

12 electrolux

14 electrolux

Distributeur de liquide

16 electrolux

Programmes de lavage

Entretien et nettoyage

Caractéristiques techniques

Installation

Branchement électrique

117952250 - 00 - 042009

Más productos y manuales para Lavadoras ARTHUR MARTIN ELECTROLUX

Modelos	Tipo de documento
AW855F	Manual de usuario ARTHUR MARTIN ELECTROLUX AW855F Manuel utilisateur, 17 paginas
ASF45012W	Manual de usuario ARTHUR MARTIN ELECTROLUX ASF45012W Manuel utilisateur, 28 paginas
AW897F	Manual de usuario ARTHUR MARTIN ELECTROLUX AW897F Manuel utilisateur, 17 paginas
ASF45012S	Manual de usuario ARTHUR MARTIN ELECTROLUX ASF45012S Manuel utilisateur [da] , 28 paginas
ASF64010	Manual de usuario ARTHUR MARTIN ELECTROLUX ASF64010 Manuel utilisateur [it] , 48 paginas
ASF66810X	Manual de usuario ARTHUR MARTIN ELECTROLUX ASF66810X Manuel utilisateur, 48 paginas
AW889F	Manual de usuario ARTHUR MARTIN ELECTROLUX AW889F Manuel utilisateur, 17 paginas
ASL64011	Manual de usuario ARTHUR MARTIN ELECTROLUX ASL64011 Manuel utilisateur, 28 paginas
ASF45010	Manual de usuario ARTHUR MARTIN ELECTROLUX ASF45010 Manuel utilisateur, 48 paginas
ASF2440	Manual de usuario ARTHUR MARTIN ELECTROLUX ASF2440 User Manual, 24 paginas
ASL45010	Manual de usuario ARTHUR MARTIN ELECTROLUX ASL45010 Manuel utilisateur [en] , 28 paginas
ASF45030W	Manual de usuario ARTHUR MARTIN ELECTROLUX ASF45030W Manuel utilisateur, 24 paginas
ASL64050	Manual de usuario ARTHUR MARTIN ELECTROLUX ASL64050 Manuel utilisateur, 28 paginas
ASF66620W	Manual de usuario ARTHUR MARTIN ELECTROLUX ASF66620W Manuel utilisateur, 28 paginas
ASI67050X	Manual de usuario ARTHUR MARTIN ELECTROLUX ASI67050X Manuel utilisateur, 28 paginas

Creative DE5621 Manuál s instrukcemi Strana 39

Komentáře k této Příručce

Související produkty a manuály pro Sítě Creative DE5621

ARTHUR MARTIN ELECTROLUX ASI64030X manuales

Arthur martin electrolux ASI64030X Manual de usuario (24 paginas)

Tabla de contenidos

Más productos y manuales para Lavadoras ARTHUR MARTIN ELECTROLUX